Richmond Series

SHELLS

Vintage construction method using the thinnest 3.5mm thin shells & full contact bearing edges with internally chamfered re-rings at 4.5mm taking the complete bearing edge to 8mm. Full contact on both batter & reso (toms & kick), full contact batter and sharp 30º reso (snare)

Featuring a 15” floor tom spanning the tuning range from 14 – 16” gap all in one and a bass drum mounted tom (with Liberty bracket and Gibraltar Single ball L-rod w cymbal mount).

Shell construction -100% Premium Finnish Birch,
Rack toms, floor toms – 6 ply, (3.5mm) with 9 ply re-rings (4.5mm) totalling 8mm full contact bearing edges.
Snare drum – 6 ply (3.5mm) with 9 ply re-rings (4.5mm) totalling 8mm full contact batter and 30 degree snare side bearing edge.
Kick (with stem mount), – 12 ply shells (6.5mm) with 6 ply re-rings (3mm) totalling 9.5mm full contact bearing edges
Bearing edges – Full contact on all toms & kick with 30 degree on snare side
Finish -Yellow sparkle lacquer (Featured kit)
Lugs -Liberty Chrome Beetle lugs
Drum Hoops -2.3mm Chrome Triple flange hoops on all drums
Badge -Liberty Iconic badge

Hand made in Liberty’s Shildon factory by a dedicated team of skilled craftsmen & finishers. The Richmond is available in a large number of finishes.
Want to customise your own finish? The Liberty kit builder has a more comprehensive list of available finishes
LIBERTY DRUMS KIT BUILDER

The Richmond series is available in a 3 or 4-piece shell pack:

12×8″ bass mounted tom
15 x 14″ floor tom
20×15″ kick drum
Opt 14×5.5″ or 14×6.5″ snare drum

The featured Richmond series is available in the following product codes:
LD-BIR-311-RI-18 (12×8, 15×13, 18×14)
LD-BIR-311-RI-20 (12×8, 15×14, 20×15)
LD-BIR-311-RI-22 (12×8, 15×14, 22×15)
LD-BIR-311-RI-24 (12×8, 15×14, 24×15)

Optional snare drums @ 14×5.5 or 14×6.5